|
|
|
|
|
|
|
-
-
Ramps
|
PVI Modular Ramp System
PVI (Prairie View Industries) designed a modular, all aluminum ramp system that can be used for home and commercial access. The PVI Modular Ramp System is strong, durable, portable, flexible, and affordable. It provides quality and functional access to many areas. The ramp system includes standard components that can be assembled quickly and easily with common hand tools. The modular components make it easy to move the ramp to a new location or change the configuration.
Features:
- Standard handrails consists of two 1.5" diameter horizontal rails; height -- 36" to 38"
(optional handrail designs available)
- Width: 36", Length: As required -- 4' minimum (custom sizes available upon request)
- Load capacity: 100+ lbs. per square foot
- Slope: Adjustable as required
- Floor: Slip resistant grooved aluminum
- Edge protection: 2" curb
Back to Top |
|
PVI Threshold Ramp
Designed for doorways, this small threshold ramp has holes punched in each of the top corners for easy installation. It is made out of aluminum, surfaced with anti-slip, high traction safety tape. Lightweight yet durable, the load capacity of this ramp is 300 lbs. per axle.
|
Threshold Ramp Specifications |
| Length |
Width |
Thickness |
Weight |
Capacity |
| 8 inches |
32 inches |
|
2 ½ lbs. |
300 lbs. per axle |
| 10 inches |
32 inches |
|
3 ½ lbs. |
300 lbs. per axle |
| 12 inches |
32 inches |
|
4 lbs. |
300 lbs. per axle |
| 16 inches |
32 inches |
1 ½ inches |
6 lbs. |
300 lbs. per axle |
|
24 inches |
32 inches |
1 ½ inches |
10 lbs. |
300 lbs. per axle | |
Back to Top
 |
PVI Van Ramp
This 3-section, manually-operated van ramp is the answer people have been seeking for. It is reliable and affordable. No assembly is required, as it is easily installed by mounting the ramp to the floor of the van. The ramp is constructed of aluminum and is spring-assisted, making the ramp easy to be operated by a single user. There is also a traction tap on the surface of the ramp. The van ramp is ideal for loading scooters and wheelchairs.
| Van Ramp Specifications |
| Size |
Load Capacity |
Folded
Height |
Weight |
| 7' x 27" |
600 lbs. on two axles |
36 inches |
43 lbs. |
| 8' x 27" |
600 lbs. on two axles |
40 inches |
54 lbs. |
| Note: 32" minimum inside door opening required for this ramp. | |
Back to Top
|
| | | |
-
-
Patient Lifts
|
|
|
Hoyer Hydraulic Lifter with 6-Point Cradle
The Hydraulic Lifter is a reliable device that is able to lift a person up to 400 lbs. Its traditional chrome finish upholds lifter appearance, and it has a 6-point cradle that accommodates 4-point and traditional slings. The standard 1.75" tubing adapts to all bathroom mount units for more versatility, and the full lifting range gives the unit floor pick-up capabilities.
Features:
- Rotating pump handle
- Convenient storage
- 4 inch casters
- Adjustable "U" base
- Optional 3" or 5" casters available
- Product weight: 80 lbs.
- Product width: 24" minimum, 39.5" maximum
- Product length/depth: 41 inches
- Base clearance: 5.5 inches
- Mast Height: 52 inches
- Tubing diameter: 2" round
Back to Top |
Home Care Beds
|
Invacare IVC Home Care Bed with microAIR 3500S Mattress
Invacare introduces a Home Care Bed that offers a number of innovations that translate into long-term savings over the product lifecycle. The new IVC bed components such as the Universal Bed End, headspring, and foot spring are designed to be easier to deliver, set-up, clean, and maintain. Its DC low voltage, compact motor system is fast, quiet, and light; the IP66 rated waterproof enclosures allow the entire system to be washable with standard water pressure (power washing is not recommended). The high impact bed end panels are durable, impact and scratch resistant, and washable for easy cleaning.
Specifications:
- Bed height: 15" - 23" (measurement from floor to bed deck)
- Overall dimensions: 36" wide x 88" long
- Sleep surface: 36" wide x 80" long
- Weight capacity: 450 lbs. (total including all accessories)
The microAIR 3500S is a portable low air loss therapy mattress replacement system that provides the therapeutic benefit of pressure relief and skin moisture management. It also provides the benefits of true low air loss for pressure ulcer therapy. The microAIR 3500S has 9" air cell height for deep patient immersion, whisper quiet control unit, waterproof, vapor permeable therapy pad provides a low friction surface, and provides pressure relief below capillary closure.
Specifications:
- Power: 115 vac, 50/60 Hz, 2A
- Leakage current: Less than 100 mircoamps
- Mattress weight: 24 lbs.; Power unit weight: 27 lbs.
- Weight capacity: 350 lbs.
- Material: Mattress cells--200 denier, polyurethane coated nylon, Therapy cover--70 denier nylon with a polyurethane, breathable membrane layer, Under-layer--polyester-quilted, CA117 Fire Retardant
Back to Top |
Walkers
|
|
|
Dolomite Symphony
The Symphony, made from ultra-lightweight aluminum, has the ultimate safety, comfort, and ergonomic design. Its elegant silver color makes it stylish and sophisticated.
Features:
- Three seat heights
- Patented brake system with adjustable tension
- Seat flips up for greater reach access and for gait training
- Adjustable back support provides comfort and safety
- Curb climber and basked included
- Weight capacity: 275 lbs.
Back to Top |
|
| | | |
-
Incontinence Supplies
|
|
First Quality "IB" Series Briefs
First Quality products offer great absorbency for an incredible value. They are 100% latex-free and offers a unique body contour shape.
Features:
- Super-absorbent
- Odor-reducing polymer that neutralizes ammonia in urine
- Soft, multi-strand elastic gathers
- Soft, cloth-like facing sheet
- A fast-wicking blue acquisition layer to pull liquid quickly away from the skin
- Highly visible wetness indicators
- Refastenable tapes
- Available in sizes:
- Youth (fits 15"-22" waist or hips, whichever is larger)
- Small (fits 20"-31" waist or hips, whichever is larger)
- Medium (fits 32"-45" waist or hips, whichever is larger)
- Large (fits 45"-58" waist or hips, whichever is larger)
- Extra-large (fits 56"-64" waist or hips, whichever is larger)
Back to Top |
CPM Machines
|
|
Optifex Knee CPM
The OptiFlex™ is visually inclined and therapeutically functional. Its ultra-wide design accommodates a typical knee replacement or an athletic patient. It provides comfort, compliance, and outcome.
Features:
- Progressive ROM eliminates time-consuming adjustments
- Oscillation Zone™ increases time spent in the working ROM
- Fast Back™ is mode-activated and increases acceleration
- Comfort Zone™ reduces the flexion angle limit
- Back-lit display and buttons
- Hyperextension (-10
º) to full knee flex (120º)
- Product weight: 26 lbs.
Back to Top |
|
| | | |
|
|
|
